The track-dedicated 1000PS McLaren P1™ GTR will debut at the 2015 Geneva Motor Show in limited production form with only minor modifications to the Design Concept presented just six months ago. The most noticeable change is the livery that the Geneva show car will be sporting. It is one which will be available to the fortunate few who will be joining the McLaren P1™ GTR Driver Programme that kicks off at the Circuit de Catalunya in Spain in 2015. The design is homage to the yellow and green McLaren F1 GTR, chassis #06R, which has claimed its own place in history as one of the five F1 GTRs that dominated the 24 Hours of Le Mans in the historic debut by McLaren 20 years ago.
From design concept to the track
The McLaren P1™ GTR has completed an extensive and intense testing schedule across the world following the unveil of the Design Concept at the Pebble Beach Concours d'Elegance last summer. This has produced enhancements to the original design to optimise aerodynamic performance and cooling.
The front track is 80mm wider than the road-going McLaren P1™ and with its aggressively profiled front splitter, the also car sits 50mm lower to the ground on centre-locking 19-inch motorsport alloy wheels shod with Pirelli slick tyres. The lower bodywork is trimmed with a sleek aerodynamic blade as previewed on the design concept, which cleans the flow of air along the car's flanks.
The lightweight windscreen from the McLaren P1™ road car, measuring just 3.2mm thick, has been retained, while the side windows are now motorsport-specification polycarbonate with a sliding 'ticket window' on the driver's side. The chemically toughened glass panels in the roof have been replaced with carbon fibre panels to give the cabin a more enclosed, cocooned environment, as has the engine bay cover. The weight saving measures on the McLaren P1™ GTR combine to strip out 50kg over the road-going model.
The rear of the track-only model is dominated, in contrast to the road-going McLaren P1™, by the presence of a fixed-height wing which sits more than 400mm above the sculpted rear bodywork - an increase of over 100mm of the adjustable wing on the road car. Working in conjunction with the front-mounted aerodynamic flaps ahead of the front wheels, the rear wing helps to increase downforce levels by more than 10 percent - meaning up to 660kg at 150 mph. Mounted on light weight carbon fibre pylon supports, the wing retains the DRS (Drag Reduction System) of the road car, which trims the pitch from 32° to 0° at the push of the button on the steering wheel. Another bold and differentiating feature at the rear are the large twin exhaust pipes, formed from an Inconel and titanium alloy. This system saves in excess of 6.5kg over the already light road-going system.
Significant updates and modifications to the IPAS powertrain have been made beneath the 'shrinkwrapped' carbon fibre bodywork. At its heart, the McLaren P1™ GTR seamlessly integrates the 3.8-litre twin-turbo V8 petrol engine with an enhanced lightweight electric motor. Combined, these powerplants generate 1,000PS; 800PS (789bhp) is produced by the petrol engine, coupled to 200PS (197bhp) available immediately from the electric motor.
The powertrain has been thoroughly revised for optimum performance on track, with key components replaced with motorsport-developed parts, more suited to the sustained high speed running the cars will be subjected to. In addition to this, features within the powertrain of the McLaren P1™ designed specifically for public highway use have been removed to reduce weight.
McLaren F1 GTR #06R: inspiring a new generation
McLaren F1 GTR chassis #06R was campaigned successfully throughout the 1995 and 1996 seasons with Mach One Racing, and is one of the longest serving examples of the McLaren F1 GTR in competition. The Harrods-sponsored #51 was famously one of seven McLaren F1 GTRs to compete at the 24 Hours of Le Mans in 1995, and was driven to the final podium position by multiple Le Mans race winner Derek Bell, his son Justin, and Andy Wallace. After this result, the team went on to win the final three races of the BPR Championship.
The following year, the team enjoyed another strong campaign. Oliver Grouillard joined Derek Bell and Andy Wallace in the line-up for the 24 Hours of Le Mans, and finished a commendable sixth. The team also claimed a win at Silverstone in the Global GT Endurance championship.
McLaren P1™ Driver Programme
The first locations for the first McLaren P1™ Driver Programme have now been confirmed, and will see drivers attend an initial test session at Silverstone, England, followed by the first on-track activity at Circuit de Catalunya in Spain. These events will follow on from individual driver profiling sessions at the McLaren Technology Centre. These tailored consultations will include a race seat fitting, a Human Performance Centre assessment, and final discussions around the design and livery of each model with McLaren Automotive Design Director Frank Stephenson. Each driver will also experience the McLaren P1™ GTR from the simulator for the first time.
Ultimate Series forms the third and final tier of the McLaren model line-up
The McLaren P1™ GTR joins the road-going McLaren P1™ in the Ultimate Series. This exclusive range prioritises aerodynamics and outright performance through notable advances in weight reduction, chassis and powertrain engineering and the use of pioneering materials.
McLaren has now established a three tier naming structure of Sports Series, Super Series and Ultimate Series. The Sports Series is the entry point to McLaren and will make its global debut at the 2015 New York International Auto Show in April. Above this sits the core McLaren Super Series, comprising the 650S, the Asia-only 625C and the recently-announced 675LT which will premiere at the 2015 Geneva Motor Show.
The 928PS of the new V8 and 347PS of the E-module combine to produce 1275PS, giving W1 the highest-ever power output of any McLaren and putting it above all core competitors.
McLaren F1 was the first production road car to use a complete carbon fiber reinforced plastic (CFRP) monocoque chassis structure. Aluminium and magnesium was...
One of the rarest McLaren roadcars ever built, the McLaren F1 GT, is on display at the 2015 Goodwood Festival of Speed. Kindly loaned to McLaren, chassis...
When viewed from above, the McLaren Senna is nature's most efficient shape - a teardrop - but with each corner pushed out into the airflow to ensure..
McLaren Sabre by MSO is the co-creation of its customers and McLaren Special Operations designers and engineers. There are just 15 examples, each tailored...
McLaren 750S Spider has an inherent advantage over rival open-top supercars built with aluminium and steel because of the inherent stiffness and rigidity advantages of carbon...
The 4.0-litre twin-turbocharged McLaren V8 engine that powers the McLaren 720S Spider is unchanged from the Coupe. Mid-mounted for exceptional handling...
McLaren 765LT Spider features the same twin-turbocharged M840T engine as the coupe, a 4.0-litre V8 with a flat-plane crankshaft, dry sump lubrication...
The 4.0-litre, twin-turbocharged V8 engine with power of 750PS and torque of 800Nm provides ferocious performance, with the McLaren 750S capable of 0-100kmh in 2.8 s...
The top of the V8 engine in the new McLaren 720S is 120 mm lower than in the first generation of McLaren Super Series models, with the reduction in...
McLaren 765LT is the most powerful and responsive road-legal McLaren LT to date. A 4.0-litre twin-turbocharged V8 McLaren M840T engine - which has a flat-plane...
The essence of the McLaren Speedtail is modern design and craftsmanship in the truest sense, the breathtakingly sophisticated shape having been brought...
The astonishing new McLaren P1™, which debuted in production form at the 2013 Geneva Motor Show, has a clear goal - to be the best driver's car in...
2015 Goodwood Festival of Speed sees a special McLaren P1™, prepared by MSO, with inspiration drawn from the patriotic French livery of the helmet...
The rear wing also features much bigger endplates than those on a standard McLaren P1 GTR wing - echoing the look of the MP4-4 wing. Additional downforce is...
The track-dedicated 1000PS McLaren P1™ GTR will debut at the 2015 Geneva Motor Show in limited production form with only minor modifications to the...
The astonishing new McLaren P1™, which debuted in production form at the 2013 Geneva Motor Show, has a clear goal - to be the best driver's car in...
The Lamborghini Aventador S design results in significantly enhanced aerodynamic performance. Front downforce has been improved by more than 130% over...
Lamborghini Aventador LP780-4 Ultimae celebrates the Lamborghini Aventador's complex yet elegant lines and surfaces: the culmination of Lamborghini's aspirated-V12 design...
The new Lamborghini Aventador SVJ, where SV historically stands for Superveloce - meaning 'superfast' - takes the 'Jota' suffix, denoting its track and...
With the Lamborghini Aventador LP700-4, Automobili Lamborghini is redefining the very pinnacle of the world super sports car market - brutal power,...
With increased power, lower weight, improved aerodynamics and innovative technologies the Lamborghini Aventador LP750-4 Superveloce is the most pure...
The all-new Ford GT serves as a technology showcase for top EcoBoost® performance, aerodynamics and lightweight carbon fiber construction. The GT is...
Unveiled at the 2002 North American International Auto Show, the Ford GT40 concept became an instant sensation. And just 45 days after the vehicle was...
1,500 HP was the power target for the Bugatti Chiron. To achieve this objective, the eight-litre W16 engine which is already well-known to customers and...
Bugatti Chiron Pur Sport's concept has been geared towards agility in every sense of the word. The Design Development department's focus was to lend...
Bugatti Chiron Super Sport 300+ is visually distinct from the Chiron, not least due to its extended and aerodynamically optimised body, which is designed for...
On the Bugatti Chiron Super Sport, features like side air curtains alongside the air intakes result in improved airflow from the front to the wheel arches...
The Ferrari F12berlinetta ushers in a new generation of Ferrari 12-cylinders in the form of a car that delivers unprecedented performance from an...
Ferrari revealed the F12tdf which pays homage to the Tour de France, the legendary endurance road race that Ferrari dominated in the 1950s and '60s,...
Ferrari design team led by Flavio Manzoni developed the LaFerrari's styling working in close synergy with the engineers to emphasise the exacting link between...
Ferrari 812 Superfast's exceptionally futuristic, finely-honed lines also, however, clothe Prancing Horse power at its rawest, as an entirely new...
One of the Ferrari 812 Competizione's many striking features is its bonnet, which has a transverse groove in which the carbon-fibre blade sits.
The eternity of the element air. Gentle and refined, yet the strength of the wind it is able to erode even the toughest of materials giving birth to...
The Pagani Huayra BC is the most technologically advanced Huayra Coupé yet, introducing innovative technical solutions which will be applied in the...
Aston Martin DBS Superleggera combines perfect proportions and painstaking surfacing. Its magnificent physique - flawlessly sculpted utilising lightweight...
Aston Martin DBS GT Zagato utilises the first automotive application of configurable carbon and metal 3D-printed interior finishes. A beautiful central...
A unique design of rear diffuser maintains aerodynamic balance from front to rear and ensures the Aston Martin DBS770 Ultimate is as unmistakable from the rear...
Aston Martin unveiled the most eagerly anticipated car of the year the new Aston Martin DBS at the Pebble Beach Concours d'Elegance on August 16th 2007,...
Unveiled at Blenheim Palace on September 25, 1967, the William Towns designed Aston Martin DBS was originally only intended for limited production. In its...