For the first time in the model's history, Honda developed two distinct versions of the Accord when the 5th generation model was launched in 1993; one version for the European market and one for the North American and Japanese market. Honda and the Rover Group created the European Accord and the Rover 600, a reflection of the past success they had with the Honda Legend and the Rover 800. This generation Accord was also sold in Japan as the Isuzu Aska, while some Isuzu products were sold as Honda products there also.
At its introduction in 1993, it won the Car of the Year Japan Award for the second time.
North America, Japan and Philippines
The 5th generation North American Accord was launched on 9 September 1993 and was based on the new 'CD' chassis. Larger than its predecessor, primarily to better suit the requirements of the North American market, the new model grew in width but shrunk in length, leaving it classified as a mid-size car in North America. It thus became too wide to fit within the favorable tax bracket in Japan, where its role was to be partially taken over by the slightly narrower second-generation Honda Ascot (sold at Honda Primo Japanese dealerships) and Honda Rafaga (sold at Honda Verno). Previous generations of the Accord sold in Japan were limited to a width dimension of 1,695 mm (67 in) while international models were slightly wider, however this generation no longer complied. The engines offered with the Accord also exceeded the maximum limit of 2000cc to remain in the favorable "compact" tax bracket. The installation of a 2.0 litre engine in Japanese models made buyers liable for more annual road tax over the smaller 1.8-litre engine, which affected sales.
Development began in September 1989, along with the design process in June 1990. The final design was selected by an early date of 18 December 1990 and frozen in by mid-1991. Design inconsistencies in early 1992, caused several alterations to be made until April 1992, when a secondary design freeze took place, ahead of scheduled 1993 production. Design patents were later filed in the United States on 16 December 1992 for the "CD". Production later began at Marysville assembly on 24 August 1993.
Honda of Japan marketed four different size engines in the Japan-Spec Accord Sedan:1.8, 2.0, 2.2 VTEC and 2.2 DOHC VTEC. The Japanese-spec Accord models were marketed as the following: EF, EX, 2.0EX, 2.0EXL, 2.2VTE, 2.2VTL, 2.2VTS and SiR. All Accord versions were sold at Honda Clio locations in Japan.
The DX, LX and EX models remained the American trim lines while Canada retained the LX, EX and EX-R. The 5-speed manual transmission remained mostly unchanged, while the 4-speed automatic noted for its hard shifts, now included Honda's "Grade-Logic" shift program, which would prevent "gear-hunting" by holding the current gear while driving on a sloped incline. All Accord models received a more ergonomic interior with standard safety features such as dual airbags and reinforced side-impact beams. Exclusive to the EX was the F22B1 SOHC VTEC version of previous generation 2.2-liter 4-cylinder (making 145 hp (108 kW) up from 140 hp (104 kW) on the previous generation EX), anti-lock brakes (now an option for the LX), 4-wheel disc brakes, 15-inch alloy wheels, and a rear stabilizer bar. Leather was an option in the EX trim with leather equipped models now being referred to as EX-L. DX and LX models came equipped similarly to the previous generation and were fitted with a revised version of the previous generation's 2.2-liter non-VTEC 4-cylinder engine. This F22B2 engine was rated at 130 hp (97 kW) up from 125 hp (93 kW) the previous generation. The Accord was again named Motor Trend Import Car of the Year for 1994. The Accord coupe as in the previous generation looked almost exactly like the sedan, and was the last generation of the Accord to offer a wagon variant in North America until the introduction of the Accord Crosstour in 2009.
In 1994, the 1995 Accord debuted a V6 engine, the 2.7L C27 borrowed from the first generation Acura Legend, in the U.S. market. The V6 was offered in both the LX and EX versions of the sedan, LX models being referred to as LX-V6 and EX models as EX-V6. EX-V6 models came equipped similarly to the EX-L with leather seats being the only option in the EX-V6. Addition of the taller C27 engine required substantial alterations to the CD platform, with V6 models sporting a redesigned engine layout, taller front fenders, and a different hood than I4 models; however, these differences are difficult to spot without both models parked side-by-side. Both versions of the V6 received a dual-outlet exhaust, a 4-speed automatic transmission, 15-inch machined aluminum alloy wheels on the EX-V6 and 15-inch steel wheels with full covers on the LX-V6, and a slightly updated front grille (which would be later used in all 96-97 Accords). The Accord saw very few other changes for 1995 with the exception of a few different exterior and interior color combinations.
In 1995, the Accord underwent the usual mid-generation facelift for 1996. More rounded bumpers, a slightly modified front fascia (which was originally exclusive in the V6 models in 1995) with new signal lights and rear taillights gave the Accord a softer look. All Hondas now complied with the federal government's requirement of OBD II engine diagnostics though all three engine choices remained the same. In order to increase the Accord's competitiveness against its rivals in different international markets, Honda CEO Nobuhiko Kawamoto decided on one basic platform for the sixth-generation Accord, but with different bodies and proportions for local markets. In the U.S., the 1996 model lineup included the 25th Anniversary Edition, a model positioned between the DX and LX. The Special Edition trim package was introduced.
For the 1997 model year, Honda released the "Special Edition" version of the Accord (not to be confused with the SE). It was offered in three colors: Heather Mist Metallic, San Marino Red and Dark Currant Pearl. The Special Edition received a factory installed security system with keyless entry, single-disc CD player, body colored side molding, distinctive alloy wheels and a sunroof. It was offered in an automatic transmission only and was fitted with the same engine as the LX. Acclaimed for its handling, the 1996 Accord has been known as one of the best handling Japanese midsized sedans of all time, posting impressive lateral g figures of up to .89 g's.
In New Zealand, the 5th generation Accord was assembled at Honda's manufacturing site in Nelson and was released in March 1994. It was available in LXi, EXi and EXi-S trim levels. A facelift was released in December 1995, which coincided with the release of VTEC engines in the upper-spec models. Trim levels were LXi, VTi, and VTi-S. These were the first NZ-market Accords to have airbags - two in the VTi-S, one in the VTi.
U.S. built coupe and wagon models of this generation were shipped to Europe with both left and right hand drive but there was no V6 option.
This generation of Accord is one of the most frequently stolen cars in the U.S. with the 1994 model being stolen more frequently than its siblings. The Acura Integra and Honda civic are also popular targets for car theft.
European model
The 5th generation Accord for the European market was unveiled in 1993 and was not related directly to the North American 'CD' Accord. It was in fact the Japanese-market Honda Ascot Innova which was based on the previous 4th generation 'CB' Accord. It was the result of a joint effort with the Rover Group that provided Rover with the 600 series. The exterior was designed by Shigeo Ueno in 1990.
In 1996, the European Accord received a minor facelift and was given a new front end (new headlights, bumper, bonnet and grill) and slightly different taillights (see images). The styling of the facelifted Accord remained identical to the styling of the Ascot Innova (although the frameless doors were replaced with conventional items) and featured the design language first introduced on the 5th generation Honda Civic. The styling of the European Accord differed dramatically from the North American which featured a more conventional saloon styling compared to the European model's low slung, fastback inspired look which also incorporated rear quarter windows. The facelifted Accord was also equipped with two airbags as standard.
However, the European Accord did not spawn an estate or coupe version, Honda instead opting to import the coupe and estate (Aerodeck) versions of the North American Accord.
The diesel model of the Accord was fitted with the direct injection Rover L-Series diesel engine, as also fitted in the Rover 600.
As part of the tie-up with the Rover Group the European Accord spawned Rover's replacement for the Austin Montego in 1993. Called the 600, the car shared its platform with the European Accord and, with the exception of the front doors, lower rear doors and windscreen, sported unique styling which dispensed with the rear quarter windows. The interior design of the 600 was very similar to the Accord's however, while the dashboard design was identical.
This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia.
Specifically created to bring a 'New Sports eXperience' to the supercar segment, the Honda NSX challenges prevailing beliefs about supercars, just as the...
The biggest exterior changes for the NSX came in 2002 when it received a facelift with fixed headlights and various other cosmetic refinements such as xenon...
Honda NSX was the first production car to feature an all-aluminium semi-monocoque, incorporating a revolutionary extruded aluminium alloy frame and suspension components.
The Honda NSX (Acura NSX in North America and Hong Kong) is a sports car produced by the Japanese automaker Honda. It has a mid-engine, rear-wheel drive...
Honda NSX-R's 3.0-litre engine had a blueprinted and balanced crankshaft assembly which is exactly the same labour-intensive high precision process done for...
The fifth-generation Prelude marked a return to the body style of the late 1980s, or third generation, in an attempt to curb slumping sales of the...
The Prelude 2.2 VTEC is sometimes incorrectly referred to as a VTi. In Canada, the Si was called the SR, and the VTEC was called the SR-V.
In 1990 the Honda Prelude was given a facelift from the previous third generation (1987-1989) styling to a newer look. This facelift featured slightly larger...
Honda Prelude featured innovative features for its time such as a 0.34 drag coefficient, roof pillars made of high-strength metal and its signature feature...
The third generation Prelude was similar to the second generation, however it gained four wheel steering on some models, as well as a 2.0 L SOHC...
Fuel injection was introduced in 1985 - in the "Si" models. In Japan, Asia and Europe, it was available with a 2-litre DOHC 16-valve PGM-FI engine...
The Honda Prelude was a front wheel drive I4-engined coupe that was manufactured by Honda between 1978 and 2001. It spanned five generations of cars but...
Honda Civic Coupe is available in LX, Sport, EX and Touring trims. The 2019 Civic launch will continue later in 2018 with the Civic Si Coupe and Sedan...
Honda Civic Si Coupe and Sedan both benefit from exterior styling enhancements befitting the model's aggressive driving dynamics. These include revised...
The creation of this new 10th-generation Civic represents one of the most comprehensive and ambitious new-model developments ever undertaken by Honda,...
Following a major refresh of Civic Sedan styling for 2013, Honda turns its attention to the Honda Civic Coupe and Coupe Si, implementing a host of...
The look of the Honda Civic Coupe conveys an aggressive attitude with a more angular front fascia, mesh grille and a tapered rear roofline that flows...
Widely considered the prototypical modern sport compact car, the newly-updated 2009 Honda Civic Si Coupe, available also as a sedan, epitomizes 4-cylinder...
As the Civic Coupe has become more sport-oriented with unique exterior dimensions, the interior volume and rear seat room have become smaller to create a...
Trims available in North America for the coupe body style were the VP, DX (up to 2003), EX, HX, LX (EM2), LX Special Edition or EX Special Edition...
The 1995 Canadian-only DX "Special Edition" added an AM/FM cassette player, wheelcovers, centre armrest console, clock, power steering, and power mirrors.
Trims available in the two-door coupe body style, introduced for 1993, were the DX (EJ2), EX, and EX-S (EJ1), for the United States Domestic Market (USDM)...
The Honda Civic CR-X was first produced in 1983 for the 1984 model year and was a lightweight sport hatchback. In the American market, the CR-X was marketed...
The Honda CR-X, originally launched as the Honda Ballade Sports CR-X in Japan, was a compact sports car manufactured by Honda. The first generation CR-X...
The all-new 2017 Honda Clarity Fuel Cell is an even more compelling vehicle that offers greater practicality than previous fuel cell vehicles.
Honda unveiled the FCX Clarity fuel cell vehicle at the Los Angeles Auto Show, announcing plans to begin limited retail marketing of the vehicle in summer...
The revised Honda Accord sedan and Tourer models made their debut at the 2011 Geneva Motor Show. Both cars received a host of changes with the styling,...
Aimed squarely at challenging established premium contenders in the D-segment, Honda's all-new Honda Accord saloon and Tourer offer sporty styling, greater...
Internationally, the Accord split into two distinct versions, one for North America, and another for sale worldwide. The models are often referred to as the...
The Honda Accord is an automobile manufactured by Honda, redesigned in 2003 and sold worldwide. Accords sold in Japan (and elsewhere in the world) vary...
Honda Integra Type R is equipped with a 1.8-liter DOHC VTEC in-line 4-cylinder (B18C) engine. In the JDM Type R this engine produces 200 PS (197 hp; 147 kW) at 8,000 rpm...
The Sedan's body design is bold and decisive, sleek and fluid, while the Honda Accord Coupe body design is rakish, taut and athletic. In both body styles...
Careful sculpting on the lower door sides continues the kinetic look of the Honda Accord Coupe, while helping to direct airflow around the rear tires.
Honda Accord Coupe's unique muscular stance is enhanced with a bolder front grille design, new front bumper shape, enhanced brakelight appearance and...
The Accord Coupe styling radically breaks from the sedan with a uniquely aggressive image. Its long hood, sleek roofline and muscular lines suggest power...
In 2005, for the 2006 model year, which was its 30th anniversary, the North American Accord received a mid-generational refresh, though it was fairly...
In 2003, the Accord underwent another major redesign. This time, Honda decided to create two different cars that would bear the Accord name in different...
While previous generations of the Coupe were considered two-door versions of the sedan, the 1998 Coupe was the first to be given an exclusive front fascia...
For the sixth generation, Honda split the Accord into three separate models, designed for the Japanese, North American, and European markets. However, the...
For the first time in the model's history, Honda developed two distinct versions of the Accord when the 5th generation model was launched in 1993; one...
The 4th generation Accord, introduced on the "CB" chassis, was unveiled in 1989. Although much larger than its predecessor the sedan's styling...
The coupe, which was built exclusively in Honda's Marysville, Ohio factory, was "reverse exported" back to Japan where it was known as the US-Coupe CA6.
U.S. built coupe and wagon models of this generation were shipped to Europe with both left and right hand drive but there was no V6 option.
The fifth-generation Honda Accord for the European market was unveiled in 1993 and was completely different from the global model ('CD'). It was in fact...
The third and final Mazda RX-7 generation ("FD"), which brought the sports car up to date with a sleek, curvy design, arrived in 1992 was a...
Launched in 1978, the Mazda RX-7 was Mazda's first mass-market sports car and would go on to become the best-selling rotary powered vehicle in history.
Toyota Supra design delivers a 50:50 weight balance while optimizing front-to-rear aerodynamic balance. Toyota sports car heritage is evident throughout.
2020 Toyota Supra embodies its rich lineage at first glance, with a design that shows a particular kinship with the fourth-generation Supra built from 1993...
With performance equal or superior to many of the world's most exotic sports cars, it would have been easy for Toyota engineers to forget that Supra is...
In February 1986, the bonds between the Celica and the Supra were cut; they were now two completely different models. The Celica changed to a front-wheel...
Supra was redesigned again in 1985. Power output was marginally increased to 161 hp (120 kW; 163 PS) and torque was up to 169 lb-ft (229 Nm).
In mid 1981, Toyota completely redesigned the Celica Supra as well as the entire Celica lineup for the 1982 model year. In Japan, they were known as the...
For 1997 and 1998 only, there was also a Saab 900 Talladega, after a record-breaking endurance test in 1996, on the Talladega Superspeedway.
The fourth-generation 5.0-liter is set to deliver the most naturally aspirated horsepower of any Ford Mustang GT thanks to an innovative dual air intake box and...
Ford Mustang Dark Horse provides unique chassis tuning, larger rear sway bars and heavy-duty front shocks. Stopping is courtesy of 19-inch Brembo front 6 piston...
Ford Mustang GTD design is pure purpose. Every line drives aerodynamic performance at track speed, from the front splitter, vented hood and fenders to the available C-pillar...
Ford's legendary 5.0-liter V8 engine has been thoroughly reworked. It is more powerful and revs higher than any Ford Mustang GT before. This power increase...
A new two-piece upper grille, lower grille and valance, and new side grilles, all contribute to Ford Mustang Mach 1's signature look and more demanding aero...
Ford Mustang Shelby GT500 starts with a supercharged 5.2-liter aluminum alloy engine built by hand. To keep the intake air cooler and deliver a lower...
Upgrades to Ford Mustang Shelby GT350's standard MagneRide active suspension complement the aero and tire enhancements with recalibrated springs and...
The Ford Mustang EcoBoost engine uses direct injection, variable cam timing and turbocharging to deliver plenty of usable performance and projected...
Ford Mustang GT continues with the latest edition of the throaty 5.0-liter V8, now featuring an upgraded valvetrain and cylinder heads that yield more than...
One of the most iconic performance Mustang nameplates of all time is returning with the reveal of the all-new Shelby® GT350 Mustang. The original...
Ford Mustang - the icon of American performance and style - gets even more street swagger with a new design and a list of smart features that signal even...
The 2013 Mustang GT with 5.0-liter engine will now deliver 420 horsepower. Based on learnings from developing the high-output 444-horsepower Ford Mustang...
The 2013 Ford Mustang Shelby GT500 is about to go where no Mustang has gone before, with a complete package for everyday drivers and track-day...
The Ford Mustang Boss 302 is all about performance, and a nod to heritage comes standard with new paint options and design details for 2013. A new hockey...
Muscle goes modern for 2010 as the Ford Mustang - America's favorite muscle car for 45 years straight - hits the streets with a new exterior design; new...
The 5.0 is back! The 2011 Ford Mustang GT arrives with an all-new advanced 5.0-liter V-8 engine, developed by a passionate cadre of enthusiastic engineers...
The Ford Mustang Shelby GT500 continues a legacy of all-around performance that made the original a world-class racer on tracks and road courses around the world.
How do you amp up a performance car package as complete as the new 2012 Ford Mustang Boss 302 - already a street-legal race car in its own right? Pull...
Ford gave the green light only once before: In 1968, management approved a special Mustang - a car that sacrificed nothing in its quest to be the best...
Since its dramatic 1964 introduction, Ford Mustang has been the icon of American performance with its bold style, brawny engine and rear-wheel-drive...
The 4.6-liter all-aluminum V8 that powers the 2005 Ford Mustang GT has three-valve heads and cranks out 300 horsepower. Because it has an aluminum...
Just like its 1968 namesake, the 2008 Ford Mustang Shelby GT500KR builds on the strong foundation of the Shelby GT500. Packing 40 more horses under its...
Performance Inspiration: Carroll Shelby and Ford Special Vehicle Team join forces to create a modern successor to the famous Shelby GT500 of the late 1960s...
A refreshed model with Ford's "New Edge" styling themes came in 1999. Gone were many of the soft lines of the early SN-95s. Moreover, bite was added to the...
The Mach 1 used a non-supercharged version of the Cobra's 4.6 DOHC V8 which utilized cams from the Lincoln Navigator motor, and it was conservatively rated at 305 hp.
In 2001, Ford offered a special version of its GT with the "Bullitt" nameplate. It was reminiscent of the 1968 390 fastback model driven by Steve McQueen in...
The 2000 Cobra R utilized a modular iron block and the best cylinder head/intake system yet for the modular motors, flowing staggering numbers even in stock form.
In 1996, Mustang fans were expecting the 5.8 L (351 in3) V8 to make its return to the regular production. However, this is not what they got.
To compensate for the relative lack of low end response associated with these kind of cylinder heads, SVT also put an intake manifold with dual runners...
In 1987, the Mustang got cylinder heads almost identical to the ones on the 85' GT, and a higher horsepower intake manifold, and ratings jumped to 225...
For 1979 an all new Mustang hit the dealerships. Larger and based on the "Fox" platform the new mustang deviated from the smaller compact...
The 1977 model year introduced a "Sports Appearance Group" for the Ghia model that was color matched to either black or tan paint, as well as several minor...
The second-generation Ford Mustang is a pony car that was manufactured by Ford from 1973 until 1978. It was introduced in showrooms during September 1973,...
Due to tightening emissions regulations, the Boss 351 edition and optional 429 big block were dropped after 1971, leaving the 351 cu in (5.8 L) variants as...
Very much a different car than in 1964, Ford was deluged with mail from fans of the original car who demanded that the Mustang be returned to the way it had been.
Boss 351 examples were similar in appearance to the Mach 1, and included a larger black-out hood than Mach 1's, front and rear spoilers, dual exhaust...
The 1970 model year Mustangs were restyled to be less aggressive and therefore returned to single headlamps which were moved to the inside of the grille...
This new performance engine incorporated elements learned from the Ford 385 series engine and the Boss 302, particularly the poly-angle combustion...
It's worth noting though that 1969 model year sales exceeded those of 1970. The rear fender air scoops were removed and the taillight panel was now flat...
The 1969 model year restyle "added more heft to the body" with body length extended by 3.8 inches (97 mm) (the wheelbase remaining at 108...
The Boss 302 was created to meet Trans Am rules and featured distinctive hockey-stick stripes. 1628 Boss 302's and 859 Boss 429's were sold through 1969...
The understated Boss 429 was created to homologate the Boss 429 engine (based on the new Ford 385 series engine) for NASCAR use. The two Boss models...
The GTs lost their Cobra tag for 1969 and once again were marketed simply as Shelby GT 350 and Shelby GT 500. The GT 350 and GT 500 for the 1969 model year...
The 1967 model year Mustang was the first redesign of the original model. Ford's designers began drawing up a larger version even as the original was...
Two identical 1968 Mustang GT fastbacks were used in the filming of the classic Warner Bros. movie "Bullitt" that debuted in theaters on Oct. 17, 1968.
For 1967, the GT 350 carried over the K-Code high performance 289 with a 'COBRA' aluminum hi-rise. The GT 500 was added to the lineup, equipped with a...
The Mustang GT version was introduced as the "GT Equipment Package" and included a V8 engine (most often the 225 hp (168 kW; 228 PS) 289), grille-mounted...
The 1965-1966 cars were the smallest and lightest of the GT 350 models. These cars are often called "Cobras", which was the Ford-powered AC-based...
The Saab 9-3 is a compact executive car that was originally developed and manufactured by the Swedish automaker Saab. The 9-3 was first based on the GM2900...
It featured revised styling with some models receiving a black rear spoiler and removed Saab's trademark centrally mounted "snow flap". It was available as...
2023 Nissan Z's 3.0-liter V6 twin turbo engine adds a significant bump in power output over the previous generation 370Z. The engine is rated at 400 horsepower...
Exterior revisions to Z Nismo were specifically engineered to improve aerodynamic performance on the race track. As a result of the changes, Z Nismo produces positive downforce.
If it's February in Chicago, it's time for one thing - sports cars. Bringing a taste of hot performance to the Windy City winter, Nissan debuted the...
The most striking change for the 2015 Nissan 370Z Nismo is its revised exterior design. Its GT-R-inspired functional and fully integrated aerodynamic body...
In the first full redesign of the iconic Nissan Z since its re-introduction in 2003, the new Nissan 370Z now sports a shorter wheelbase, greater use of...
The Nissan 350Z is a coupé and roadster built by Nissan Motor Company. It was introduced in August 2002 and is the fifth generation of Nissan's...
The Z32 was a new design, approved in final form by Nissan management on October 1, 1986 and designed by Isao Sono and Toshio Yamashita. The body was wider...
The Z31 chassis designation was first introduced in Japan on September 16 1983, as the Fairlady Z. Designed by Kazumasu Takagi and his team of developers,...
The Nissan S130 is a sports coupé produced by Nissan in Japan from 1978 to 1983. It was sold as the Datsun 280ZX, Nissan Fairlady Z and Nissan...
The Nissan S30 (sold in Japan as the Nissan Fairlady Z and in other markets as the Datsun 240Z and later as the 260Z and 280Z) was the first generation of...
The 2019 Chevrolet Camaro's updated designs are not only striking but also help to improve performance. For instance, the grille details and hood and...
The sixth-generation Chevrolet Camaro offers higher levels of performance, technology and refinement and is designed to maintain the sporty car segment...
Functionality defines the Chevrolet Camaro ZL1's form, with the exterior shaped during more than 100 hours of wind-tunnel testing and on-track validation...
In preliminary testing, the new Chevrolet Camaro ZL1 1LE was 3 seconds faster than the standard ZL1 Coupe around General Motors' 2.9-mile, 18-turn Milford Road...
Chevrolet introduced the restyled 2014 Camaro line at the 2013 New York Auto Show, including the return of the Z/28, the most iconic model in Camaro...
The functional hood vent on the Chevrolet Camaro SS helps reduce heat and aerodynamic lift. Moving to the rear, the sculptural decklid, horizontal lamps...
The heart of the 2014 Camaro Z/28 is the lighter, naturally aspirated 7.0L LS7 first introduced in the Corvette Z06. It is exclusively offered with a Tremec TR6060...
The wait is over. After a seven-year hiatus, the new Chevrolet Camaro is now back in dealer showrooms. Combining great looks, performance and advanced...
Two 6.2L V-8 engines are offered in the Chevrolet Camaro SS, including the new L99 on automatic-equipped vehicles and the LS3 on manual-equipped models.
The 2012 Chevrolet Camaro ZL1 debuted at the 2011 Chicago Auto Show. It is the highest-performing Camaro and the most technically advanced car ever...
2001 was the lowest production year for the Camaro with 29,009 units. This was partially due to production ending earlier than usual to begin work on the...
The third-generation Chevrolet Camaro was introduced for the 1982 model year by Chevrolet. It continued to use General Motors's F-body platform and...
For 1975, a catalytic converter was added to the exhaust system of all US-market GM passenger cars, including the Camaro. The "Air Injection Reactor"...
The Z/28 option code was introduced to the Camaro in December 1966 for the 1967 model year. It was the brainchild of Vince Piggins, who conceived offering...