Search

Honda Accord Coupe (1990)

  • Honda Accord Coupe (1990)
  • Honda Accord Coupe (1990) - Side Profile
  • Honda Accord Coupe (1990) - Rear Angle

Honda Accord Coupe

The 4th generation Accord, introduced on the "CB" chassis, was unveiled in 1989. Although much larger than its predecessor the sedan's styling was evolutionary, featuring the same low slung design and wraparound rear window as the 3rd generation Accord. For the first time a 3-door hatchback was no longer available internationally.

This was one of the first U.S. production cars to feature optic reflectors with completely clear lenses on the headlamps. The styling reflected influences from the flagship Honda Legend (sold in North America as an Acura), as Japanese Accords were now sold at Honda Clio dealerships, where the Legend, and the Honda Inspire, were sold. The growing popularity of the Accord internationally was evident in the ever increasing dimensions, which now matched almost exactly with the first generation Legend introduced in 1986.

For this fourth generation Accord, Honda made significant engineering design improvements. All Accords sold in North America came with a completely new all aluminium 2.2-liter 16-valve electronic fuel-injected engine standard, replacing the previous 2.0-liter 12-valve model from the past generation. Also noteworthy, all Accords equipped with automatic transmissions used an electronically controlled rear engine mount to reduce low frequency noise and vibration. The mount contained two fluid filled chambers separated by a computer controlled valve. At low engine speeds, fluid is routed through the valve damping vibration. Above 850 rpm, fluid is routed around the valve making the engine mount stiffer.

In the U.S., the LX-i and SE-i designations were dropped, being replaced with the DX, LX, and EX trim levels. The Canadian Accord trim levels varied slightly from the U.S. models with LX, EX and EX-R roughly corresponding to the American DX, LX, and EX, respectively. Fourth generation Japanese-assembled EXi Accords sold in Australia offered the same 4-wheel steering technology as was available optionally on the U.S. Honda Prelude, but was not included on the New Zealand-assembled versions. The four-wheel steering system was also available on the Accord's Japanese platform mate, called the Honda Ascot FTBi. U.S. Accord Coupes were available in the same DX, LX, and EX trims as the U.S. Accord Sedan (LX, EX, and EX-R in Canada).

A 125-horsepower (93 kW) 4-cylinder engine was offered in the DX and LX models (F22A1), while the 1990 and 1991 EX received a 130 hp (97 kW) version (F22A4). Cruise control was dropped from the DX sedan, with air conditioning remaining a dealer-installed option. The LX kept the same features as the previous generation including air conditioning, power windows, door locks, and mirrors. The 90-91 EX added 5 horsepower due to a different exhaust manifold design, slightly larger exhaust piping and a twin outlet muffler. 15-inch machined aluminum-alloy wheels, sunroof, upgraded upholstery, rear stabilizer bar and a high-power 4-speaker stereo cassette were standard on all EX models. Some models though rare were special ordered with an anti-lock braking system (at that time abbreviated as ALB, now all automakers refer to it as ABS). A redesigned manual transmission with a hydraulic clutch was standard equipment in all trims while an all-new electronically controlled 4-speed automatic transmission was optional for all models.

Some new dealer-installed accessories were now offered including a single-disc in-dash CD player or trunk mounted 6-disc CD changer, stereo equalizer, fog lights, security system, rear wing spoiler, trunk lip spoiler, luggage rack, full and half nose mask, center armrest, window visors, sunroof visor, car cover, and a cockpit cover.

Because of tightening auto safety regulations from the NHTSA, all 1990 and 1991 Accords sold in the United States came equipped with motorized shoulder belts for front passengers to comply with passive restraint mandates. These semi-automatic restraints were a two component system; a motorized shoulder belt along with a non-integrated and manually operated seatbelt. The shoulder belts automatically raced around each window frame encircling both the driver and front seat passenger whenever the front door closed. The process reversed to release them when opened. The lap belts however, still required manual fastening.

In early 1990 Honda unveiled the Accord Wagon, manufactured at the Marysville, Ohio plant. The Ohio plant exported right-hand drive wagons and coupes to Europe and Japan, and in Europe the station wagon (estate) was called the "Aerodeck" (in reference to the 1985-1989 2-door vehicle). All station wagons sold outside the United States were afixed with a small badge on the "C" pillar denoting the vehicle was built at the Ohio facility. European and Japanese vehicles had options not available within the U.S. including automatic climate control systems, power seats and several other minor features. The Accord Wagons were available from November 1990, only in LX and EX trim in North America or just 2.2i in Japan. They had larger front brakes to compensate for the added weight and unlike other U.S. Accords, included a driver's side airbag as standard equipment. Other than a retractable tonneau cover in the rear cargo area and keyless entry on EX models, the wagons were equipped the same as their coupe and sedan counterparts.

Return of the SE (1991)

Honda reintroduced the SE (previously SE-i) sedan for 1991. It returned to the lineup without the traditional Bose high powered audio system but with an AM/FM stereo cassette 4x20 watt EX audio system; leather-trimmed steering wheel, leather seats and door panels, a fuel-injected 140 hp (104 kW) engine, 4-speed automatic transmission, and ABS as standard equipment. For the first time, a manual transmission was not offered in the SE. Two colors were available: Solaris Silver Metallic with Graphite Black interior and Brittany Blue Metallic with Ivory interior. Unlike previous editions, the 1991 SE was not equipped with uniquely styled alloy wheels but instead carried the EX model wheels.

Update (1991-1993)

Accords received a minor facelift in 1991 for the 1992 model year. The SE trim was dropped again but left behind its 140 hp (104 kW) F22A6 engine for use in the EX models. This engine added 15 hp over the DX and LX trims and 10 hp over the 90-91 EX trim due to a further revised exhaust system. The system used the same EX-SE twin outlet muffler, a revised air intake tract, a revised camshaft and a revised intake manifold using IAB butterfly valves which open at 4600 rpm to increase air intake breathing at high rpm. It was similar in design to the 92-96 Prelude Si and VTEC models. For the 1992 and 1993 model years, the motorized shoulder belt system were replaced with a standard driver-side airbag and conventional shoulder/seatbelt arrangement for all but the center rear passenger. Anti-lock 4-wheel disc brakes became standard on the EX. The front and rear facias received a more rounded and updated look. Coupe and sedan models received a new grille, new headlights, amber parking lights, slightly thinner body side molding, updated wheel designs and for the first time, the EX coupe used wheels different from the EX sedan. The sedans received restyled shortened taillights with inverted amber turn signal and backup light positions. The coupe and wagon taillights though still resembled those from the 1990-1991 Accord. The coupe used the new revised inverted positioning of the signal and backup lights but the wagon taillights however remained the same as the 90-91 models. EX trim levels included a radio anti-theft function to deter stereo theft. A front driver's seat armrest was now standard on LX and EX models. Some dealer-installed accessories were dropped including the luggage rack, trunk-lip spoiler and cockpit cover. A gold finish kit was added.

10th Anniversary Edition and return of the SE (1993)

In 1993, Honda introduced the 10th Anniversary Edition sedan to commemorate the 10th year of U.S. Accord production. The 10th Anniversary Edition was based on the Accord LX sedan but came equipped with several features not available in the LX trim. The upgrades included ABS, 4-wheel disc brakes, 15" EX coupe six spoke alloy wheels, body colored side moldings, chin spoiler, and standard automatic transmission. Three colors were offered for the 10th Anniversary Edition: Frost White, Granada Black Pearl, and Arcadia Green Pearl. The 10th Anniversary models also included the same premium seat fabric found in EX models. The Frost White and Arcadia Green cars were paired with the same interior color as their LX/EX counterparts, Blue and Ivory, respectively. The Granada Black cars were paired with Gray interior, while the Granada Black EX had Ivory interior.

The SE returned in 1993 as both a sedan, and for the first time since the 1989 SE-i, as a coupe. The SE sedan featured standard dual front airbags; the first Accord to do so. An 8-button, 4-speaker Honda-Bose audio system, automatic transmission, leather trim, body colored bumper and body side moldings were standard. The SE coupe included a factory rear wing spoiler which differed slightly in design from the already available dealer installed accessory rear wing spoiler. In Canada, the SE came with heated front seats and heated side view mirrors. Both the sedan and coupe received distinctive 15-inch alloy wheels as well. All SE sedans during 1990-1991 and 1992-1993 were manufactured in Japan, while all SE coupes were produced in the U.S. The 1993 sedan was available in two colors: Cashmere Silver Metallic and Geneva Green Pearl, both with Ivory interior. The coupe was offered with two colors as well: Cashmere Silver Metallic and Atlantis Blue Pearl, both again with Ivory interior. Sadly, 1993 would be the swan song for the SE as an exclusive, high content, limited edition Accord model. Later generations would use a "Special Edition" designation rather than the previously used "SE" designation. These models were a combination of an Accord LX with several EX features similar to the 1993 10th Anniversary Edition LX.

At the end of the model life of the CB Accord, a "pillared hardtop" model called the Honda Ascot Innova was launched in Japan, based on the CB Accord chassis, but with a different, much more modern-styled body, taking cues from the 1992 Honda Prelude.

This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia.

      • 2016 Honda Accord Coupe
        2016

        The Sedan's body design is bold and decisive, sleek and fluid, while the Honda Accord Coupe body design is rakish, taut and athletic. In both body styles...

      • 2013 Honda Accord Coupe
        2013

        Careful sculpting on the lower door sides continues the kinetic look of the Honda Accord Coupe, while helping to direct airflow around the rear tires.

      • 2011 Honda Accord Coupe
        2011

        Honda Accord Coupe's unique muscular stance is enhanced with a bolder front grille design, new front bumper shape, enhanced brakelight appearance and...

      • 2008 Honda Accord EX-L V6 Coupe
        2008

        The Accord Coupe styling radically breaks from the sedan with a uniquely aggressive image. Its long hood, sleek roofline and muscular lines suggest power...

      • 2007 Honda Accord Coupe EX-L
        2007

        In 2005, for the 2006 model year, which was its 30th anniversary, the North American Accord received a mid-generational refresh, though it was fairly...

      • 2003 Honda Accord Coupe
        2003

        In 2003, the Accord underwent another major redesign. This time, Honda decided to create two different cars that would bear the Accord name in different...

      • 2001 Honda Accord Coupe
        2001

        While previous generations of the Coupe were considered two-door versions of the sedan, the 1998 Coupe was the first to be given an exclusive front fascia...

      • 1998 Honda Accord Coupe
        1998

        For the sixth generation, Honda split the Accord into three separate models, designed for the Japanese, North American, and European markets. However, the...

      • 1994 Honda Accord Coupe
        1994

        For the first time in the model's history, Honda developed two distinct versions of the Accord when the 5th generation model was launched in 1993; one...

      • 1990 Honda Accord Coupe
        1990

        The 4th generation Accord, introduced on the "CB" chassis, was unveiled in 1989. Although much larger than its predecessor the sedan's styling...

      • 1988 Honda Accord Coupe
        1988

        The coupe, which was built exclusively in Honda's Marysville, Ohio factory, was "reverse exported" back to Japan where it was known as the US-Coupe CA6.

    • 1991 Honda Accord Wagon
      1991

      In early 1990 Honda unveiled the Accord Wagon, manufactured at the Marysville, Ohio plant. The Ohio plant exported right-hand drive wagons and coupes to Europe...

    • 1990 Honda Accord Sedan
      1990

      A 125-horsepower (93 kW) 4-cylinder engine was offered in the DX and LX models (F22A1), while the 1990 and 1991 EX received a 130 hp (97 kW) version (F22A4).

  • CoupesCoupe / 2-door
      • 2023 Nissan Z
        2023

        2023 Nissan Z's 3.0-liter V6 twin turbo engine adds a significant bump in power output over the previous generation 370Z. The engine is rated at 400 horsepower...

      • 2024 Nissan Z Nismo
        2024

        Exterior revisions to Z Nismo were specifically engineered to improve aerodynamic performance on the race track. As a result of the changes, Z Nismo produces positive downforce.

      2 ⇵
      • 2013 Nissan 370Z
        2013

        If it's February in Chicago, it's time for one thing - sports cars. Bringing a taste of hot performance to the Windy City winter, Nissan debuted the...

      • 2015 Nissan 370Z Nismo
        2015

        The most striking change for the 2015 Nissan 370Z Nismo is its revised exterior design. Its GT-R-inspired functional and fully integrated aerodynamic body...

      2 ⇵
      • 2009 Nissan 370Z
        2009

        In the first full redesign of the iconic Nissan Z since its re-introduction in 2003, the new Nissan 370Z now sports a shorter wheelbase, greater use of...

      • 2003 Nissan 350Z
        2003

        The Nissan 350Z is a coupé and roadster built by Nissan Motor Company. It was introduced in August 2002 and is the fifth generation of Nissan's...

      • 1989 Nissan 300ZX Twin-Turbo
        1989

        The Z32 was a new design, approved in final form by Nissan management on October 1, 1986 and designed by Isao Sono and Toshio Yamashita. The body was wider...

      • 1983 Nissan 300ZX Turbo
        1983

        The Z31 chassis designation was first introduced in Japan on September 16 1983, as the Fairlady Z. Designed by Kazumasu Takagi and his team of developers,...

      • 1981 Nissan Fairlady 280Z
        1981

        The Nissan S130 is a sports coupé produced by Nissan in Japan from 1978 to 1983. It was sold as the Datsun 280ZX, Nissan Fairlady Z and Nissan...

      • 1970 Nissan 240Z
        1970

        The Nissan S30 (sold in Japan as the Nissan Fairlady Z and in other markets as the Datsun 240Z and later as the 260Z and 280Z) was the first generation of...

      • 1992 Mazda RX-7
        1992

        The third and final Mazda RX-7 generation ("FD"), which brought the sports car up to date with a sleek, curvy design, arrived in 1992 was a...

      • 1984 Mazda RX-7
        1984

        Launched in 1978, the Mazda RX-7 was Mazda's first mass-market sports car and would go on to become the best-selling rotary powered vehicle in history.

      • 2020 Toyota Supra [US]
        2020

        Toyota Supra design delivers a 50:50 weight balance while optimizing front-to-rear aerodynamic balance. Toyota sports car heritage is evident throughout.

      • 2020 Toyota Supra
        2020

        2020 Toyota Supra embodies its rich lineage at first glance, with a design that shows a particular kinship with the fourth-generation Supra built from 1993...

      2 ⇵
      • 1996 Toyota Supra
        1996

        With performance equal or superior to many of the world's most exotic sports cars, it would have been easy for Toyota engineers to forget that Supra is...

      • 1987 Toyota Supra
        1987

        In February 1986, the bonds between the Celica and the Supra were cut; they were now two completely different models. The Celica changed to a front-wheel...

      • 1985 Toyota Supra
        1985

        Supra was redesigned again in 1985. Power output was marginally increased to 161 hp (120 kW; 163 PS) and torque was up to 169 lb-ft (229 Nm).

      • 1983 Toyota Supra
        1983

        In mid 1981, Toyota completely redesigned the Celica Supra as well as the entire Celica lineup for the 1982 model year. In Japan, they were known as the...

      2 ⇵
      • 2024 Ford Mustang GT
        2024

        The fourth-generation 5.0-liter is set to deliver the most naturally aspirated horsepower of any Ford Mustang GT thanks to an innovative dual air intake box and...

      • 2024 Ford Mustang Dark Horse
        2024

        Ford Mustang Dark Horse provides unique chassis tuning, larger rear sway bars and heavy-duty front shocks. Stopping is courtesy of 19-inch Brembo front 6 piston...

      • 2025 Ford Mustang GTD
        2025

        Ford Mustang GTD design is pure purpose. Every line drives aerodynamic performance at track speed, from the front splitter, vented hood and fenders to the available C-pillar...

      3 ⇵
      • 2018 Ford Mustang GT
        2018

        Ford's legendary 5.0-liter V8 engine has been thoroughly reworked. It is more powerful and revs higher than any Ford Mustang GT before. This power increase...

      • 2021 Ford Mustang Mach 1
        2021

        A new two-piece upper grille, lower grille and valance, and new side grilles, all contribute to Ford Mustang Mach 1's signature look and more demanding aero...

      • 2020 Ford Mustang Shelby GT500
        2020

        Ford Mustang Shelby GT500 starts with a supercharged 5.2-liter aluminum alloy engine built by hand. To keep the intake air cooler and deliver a lower...

      • 2019 Ford Mustang Shelby GT350
        2019

        Upgrades to Ford Mustang Shelby GT350's standard MagneRide active suspension complement the aero and tire enhancements with recalibrated springs and...

      4 ⇵
      • 2015 Ford Mustang EcoBoost
        2015

        The Ford Mustang EcoBoost engine uses direct injection, variable cam timing and turbocharging to deliver plenty of usable performance and projected...

      • 2015 Ford Mustang GT
        2015

        Ford Mustang GT continues with the latest edition of the throaty 5.0-liter V8, now featuring an upgraded valvetrain and cylinder heads that yield more than...

      • 2016 Ford Mustang Shelby GT350
        2016

        One of the most iconic performance Mustang nameplates of all time is returning with the reveal of the all-new Shelby® GT350 Mustang. The original...

      3 ⇵
      • 2013 Ford Mustang
        2013

        Ford Mustang - the icon of American performance and style - gets even more street swagger with a new design and a list of smart features that signal even...

      • 2013 Ford Mustang GT
        2013

        The 2013 Mustang GT with 5.0-liter engine will now deliver 420 horsepower. Based on learnings from developing the high-output 444-horsepower Ford Mustang...

      • 2013 Ford Mustang Shelby GT500
        2013

        The 2013 Ford Mustang Shelby GT500 is about to go where no Mustang has gone before, with a complete package for everyday drivers and track-day...

      • 2013 Ford Mustang Boss 302
        2013

        The Ford Mustang Boss 302 is all about performance, and a nod to heritage comes standard with new paint options and design details for 2013. A new hockey...

      4 ⇵
      • 2010 Ford Mustang
        2010

        Muscle goes modern for 2010 as the Ford Mustang - America's favorite muscle car for 45 years straight - hits the streets with a new exterior design; new...

      • 2011 Ford Mustang GT
        2011

        The 5.0 is back! The 2011 Ford Mustang GT arrives with an all-new advanced 5.0-liter V-8 engine, developed by a passionate cadre of enthusiastic engineers...

      • 2010 Ford Mustang Shelby GT500
        2010

        The Ford Mustang Shelby GT500 continues a legacy of all-around performance that made the original a world-class racer on tracks and road courses around the world.

      • 2012 Ford Mustang Boss 302 Laguna Seca
        2012

        How do you amp up a performance car package as complete as the new 2012 Ford Mustang Boss 302 - already a street-legal race car in its own right? Pull...

      • 2012 Ford Mustang Boss 302
        2012

        Ford gave the green light only once before: In 1968, management approved a special Mustang - a car that sacrificed nothing in its quest to be the best...

      5 ⇵
      • 2005 Ford Mustang
        2005

        Since its dramatic 1964 introduction, Ford Mustang has been the icon of American performance with its bold style, brawny engine and rear-wheel-drive...

      • 2005 Ford Mustang GT
        2005

        The 4.6-liter all-aluminum V8 that powers the 2005 Ford Mustang GT has three-valve heads and cranks out 300 horsepower. Because it has an aluminum...

      • 2008 Ford Mustang Shelby GT500KR
        2008

        Just like its 1968 namesake, the 2008 Ford Mustang Shelby GT500KR builds on the strong foundation of the Shelby GT500. Packing 40 more horses under its...

      • 2007 Ford Mustang Shelby GT500
        2007

        Performance Inspiration: Carroll Shelby and Ford Special Vehicle Team join forces to create a modern successor to the famous Shelby GT500 of the late 1960s...

      4 ⇵
      • 1999 Ford Mustang
        1999

        A refreshed model with Ford's "New Edge" styling themes came in 1999. Gone were many of the soft lines of the early SN-95s. Moreover, bite was added to the...

      • 2003 Ford Mustang Mach 1
        2003

        The Mach 1 used a non-supercharged version of the Cobra's 4.6 DOHC V8 which utilized cams from the Lincoln Navigator motor, and it was conservatively rated at 305 hp.

      • 2001 Ford Mustang Bullitt GT
        2001

        In 2001, Ford offered a special version of its GT with the "Bullitt" nameplate. It was reminiscent of the 1968 390 fastback model driven by Steve McQueen in...

      • 2000 Ford Mustang SVT Cobra R
        2000

        The 2000 Cobra R utilized a modular iron block and the best cylinder head/intake system yet for the modular motors, flowing staggering numbers even in stock form.

      4 ⇵
      • 1996 Ford Mustang GT
        1996

        In 1996, Mustang fans were expecting the 5.8 L (351 in3) V8 to make its return to the regular production. However, this is not what they got.

      • 1998 Ford Mustang Cobra
        1998

        To compensate for the relative lack of low end response associated with these kind of cylinder heads, SVT also put an intake manifold with dual runners...

      2 ⇵
      • 1988 Ford Mustang
        1988

        In 1987, the Mustang got cylinder heads almost identical to the ones on the 85' GT, and a higher horsepower intake manifold, and ratings jumped to 225...

      • 1979 Ford Mustang
        1979

        For 1979 an all new Mustang hit the dealerships. Larger and based on the "Fox" platform the new mustang deviated from the smaller compact...

      • 1977 Ford Mustang
        1977

        The 1977 model year introduced a "Sports Appearance Group" for the Ghia model that was color matched to either black or tan paint, as well as several minor...

      • 1975 Ford Mustang Cobra II
        1975

        The second-generation Ford Mustang is a pony car that was manufactured by Ford from 1973 until 1978. It was introduced in showrooms during September 1973,...

      2 ⇵
      • 1972 Ford Mustang
        1972

        Due to tightening emissions regulations, the Boss 351 edition and optional 429 big block were dropped after 1971, leaving the 351 cu in (5.8 L) variants as...

      • 1973 Ford Mustang Mach 1
        1973

        Very much a different car than in 1964, Ford was deluged with mail from fans of the original car who demanded that the Mustang be returned to the way it had been.

      • 1971 Ford Mustang Boss 351
        1971

        Boss 351 examples were similar in appearance to the Mach 1, and included a larger black-out hood than Mach 1's, front and rear spoilers, dual exhaust...

      3 ⇵
      • 1970 Ford Mustang
        1970

        The 1970 model year Mustangs were restyled to be less aggressive and therefore returned to single headlamps which were moved to the inside of the grille...

      • 1970 Ford Mustang Boss 302
        1970

        This new performance engine incorporated elements learned from the Ford 385 series engine and the Boss 302, particularly the poly-angle combustion...

      • 1970 Ford Mustang Boss 429
        1970

        It's worth noting though that 1969 model year sales exceeded those of 1970. The rear fender air scoops were removed and the taillight panel was now flat...

      3 ⇵
      • 1969 Ford Mustang
        1969

        The 1969 model year restyle "added more heft to the body" with body length extended by 3.8 inches (97 mm) (the wheelbase remaining at 108...

      • 1969 Ford Mustang Boss 302
        1969

        The Boss 302 was created to meet Trans Am rules and featured distinctive hockey-stick stripes. 1628 Boss 302's and 859 Boss 429's were sold through 1969...

      • 1969 Ford Mustang Boss 429
        1969

        The understated Boss 429 was created to homologate the Boss 429 engine (based on the new Ford 385 series engine) for NASCAR use. The two Boss models...

      • 1969 Ford Mustang Shelby GT500
        1969

        The GTs lost their Cobra tag for 1969 and once again were marketed simply as Shelby GT 350 and Shelby GT 500. The GT 350 and GT 500 for the 1969 model year...

      4 ⇵
      • 1967 Ford Mustang
        1967

        The 1967 model year Mustang was the first redesign of the original model. Ford's designers began drawing up a larger version even as the original was...

      • 1968 Ford Mustang Bullitt
        1968

        Two identical 1968 Mustang GT fastbacks were used in the filming of the classic Warner Bros. movie "Bullitt" that debuted in theaters on Oct. 17, 1968.

      • 1967 Ford Mustang Shelby GT500
        1967

        For 1967, the GT 350 carried over the K-Code high performance 289 with a 'COBRA' aluminum hi-rise. The GT 500 was added to the lineup, equipped with a...

      3 ⇵
      • 1966 Ford Mustang GT
        1966

        The Mustang GT version was introduced as the "GT Equipment Package" and included a V8 engine (most often the 225 hp (168 kW; 228 PS) 289), grille-mounted...

      • 1965 Ford Mustang Shelby GT350
        1965

        The 1965-1966 cars were the smallest and lightest of the GT 350 models. These cars are often called "Cobras", which was the Ford-powered AC-based...

      2 ⇵
      • 2019 Chevrolet Camaro
        2019

        The 2019 Chevrolet Camaro's updated designs are not only striking but also help to improve performance. For instance, the grille details and hood and...

      • 2016 Chevrolet Camaro
        2016

        The sixth-generation Chevrolet Camaro offers higher levels of performance, technology and refinement and is designed to maintain the sporty car segment...

      • 2017 Chevrolet Camaro ZL1
        2017

        Functionality defines the Chevrolet Camaro ZL1's form, with the exterior shaped during more than 100 hours of wind-tunnel testing and on-track validation...

      • 2018 Chevrolet Camaro ZL1 1LE
        2018

        In preliminary testing, the new Chevrolet Camaro ZL1 1LE was 3 seconds faster than the standard ZL1 Coupe around General Motors' 2.9-mile, 18-turn Milford Road...

      3 ⇵
      • 2014 Chevrolet Camaro
        2014

        Chevrolet introduced the restyled 2014 Camaro line at the 2013 New York Auto Show, including the return of the Z/28, the most iconic model in Camaro...

      • 2014 Chevrolet Camaro SS
        2014

        The functional hood vent on the Chevrolet Camaro SS helps reduce heat and aerodynamic lift. Moving to the rear, the sculptural decklid, horizontal lamps...

      • 2014 Chevrolet Camaro Z28
        2014

        The heart of the 2014 Camaro Z/28 is the lighter, naturally aspirated 7.0L LS7 first introduced in the Corvette Z06. It is exclusively offered with a Tremec TR6060...

      3 ⇵
      • 2010 Chevrolet Camaro
        2010

        The wait is over. After a seven-year hiatus, the new Chevrolet Camaro is now back in dealer showrooms. Combining great looks, performance and advanced...

      • 2010 Chevrolet Camaro SS
        2010

        Two 6.2L V-8 engines are offered in the Chevrolet Camaro SS, including the new L99 on automatic-equipped vehicles and the LS3 on manual-equipped models.

      • 2012 Chevrolet Camaro ZL1
        2012

        The 2012 Chevrolet Camaro ZL1 debuted at the 2011 Chicago Auto Show. It is the highest-performing Camaro and the most technically advanced car ever...

      3 ⇵
      • 2001 Chevrolet Camaro Coupe
        2001

        2001 was the lowest production year for the Camaro with 29,009 units. This was partially due to production ending earlier than usual to begin work on the...

      • 1984 Chevrolet Camaro
        1984

        The third-generation Chevrolet Camaro was introduced for the 1982 model year by Chevrolet. It continued to use General Motors's F-body platform and...

      • 1975 Chevrolet Camaro
        1975

        For 1975, a catalytic converter was added to the exhaust system of all US-market GM passenger cars, including the Camaro. The "Air Injection Reactor"...

      • 1967 Chevrolet Camaro Z28
        1967

        The Z/28 option code was introduced to the Camaro in December 1966 for the 1967 model year. It was the brainchild of Vince Piggins, who conceived offering...

      • 1997 Saab 900 Coupe
        1997

        For 1997 and 1998 only, there was also a Saab 900 Talladega, after a record-breaking endurance test in 1996, on the Talladega Superspeedway.

      • 1999 Saab 9-3 Coupe
        1999

        The Saab 9-3 is a compact executive car that was originally developed and manufactured by the Swedish automaker Saab. The 9-3 was first based on the GM2900...

      • 2000 Saab 9-3 Aero Coupe
        2000

        It featured revised styling with some models receiving a black rear spoiler and removed Saab's trademark centrally mounted "snow flap". It was available as...

      2 ⇵
      • 2019 Dodge Challenger
        2019

        New for 2019, all Challenger RT Scat Pack models get a new look, courtesy of the 2018 Challenger SRT Hellcat. The power-bulge aluminum hood features...

      • 2019 Dodge Challenger SRT Hellcat
        2019

        The 2019 Challenger SRT Hellcat lineup delivers improved performance numbers, including a new top speed of 203 miles per hours (mph), making the...

      • 2020 Dodge Challenger SRT Super Stock
        2020

        Dodge Challenger SRT Super Stock gives the driver the ability to set up maximum drag strip performance and precision to cover the quarter mile as quickly as possible.

      3 ⇵
      • 2015 Dodge Challenger
        2015

        Inside the 2015 Dodge Challenger is an all-new enthusiast designed cockpit featuring world-class materials, execution and technology, also inspired by...

      • 2015 Dodge Challenger SRT
        2015

        The newly consolidated Dodge and SRT brands are launching out of the gate at full throttle - introducing the new 600-plus horsepower 2015 Dodge Challenger...

      • 2017 Dodge Challenger TA 392
        2017

        The new Challenger TA 392 ups-the-ante with its best-in-class 485 horsepower and 475 lb.-ft. of torque, delivering up to 113 more horsepower and a 65-lb.-ft...

      • 2015 Dodge Challenger SRT Hellcat
        2015

        The all-new 2015 Dodge Challenger SRT, with its supercharged 6.2-liter HEMI. Hellcat engine, produces an unprecedented 707 horsepower and 650 lb.-ft. of...

      • 2018 Dodge Challenger SRT Demon
        2018

        While the 2018 Dodge Challenger SRT Demon remains a potent street car, every component was scrutinized and optimized for weight, capability and durability...

      • 2018 Dodge Challenger SRT Hellcat Widebody
        2018

        2018 Dodge Challenger SRT Hellcat Widebody is powered by the 6.2-liter supercharged HEMI V-8 with 707 horsepower and 650 lb.-ft. torque...

      6 ⇵
      • 2012 Dodge Challenger Rallye Redline
        2012

        Evolving into the largest homecoming of modern Dodge rear-wheel-drive performance cars, the seventh annual Spring Festival of LXs marked the perfect...

      • 2009 Dodge Challenger RT
        2009

        At the 2008 New York International Auto Show, Chrysler LLC unveiled its full 2009 Dodge Challenger model lineup. Pricing will start in the low $20's. The...

      • 2008 Dodge Challenger SRT8
        2008

        The return of the iconic Dodge Challenger brings what pony car fanatics crave: ground shaking performance, unmistakable design cues reminiscent of the...

      • 2012 Dodge Challenger SRT8 392
        2012

        For 2012, the Dodge Challenger SRT8® 392 adds even more high-tech performance features to solidify its place as the brand's ultimate modern American...

      4 ⇵
      • 1970 Dodge Challenger TA
        1970

        The first Challenger was the division's late entrant to the pony car market segment in the United States, launched for the 1970 model year. It was strongly...

  •  
  •  
  • SHOW MORE
Full-screen image
×
Hide
Terms of Use | Privacy Policy
© 2005-2025