The second-generation Ford Mustang is a pony car that was manufactured by Ford from 1973 until 1978. It was introduced in showrooms during September 1973, in coupe and hatchback versions for the 1974 model year, in time for the 1973 oil crisis. The Mustang II had no common components with the preceding models and shared its platform with the subcompact-sized Ford Pinto.
Background
The first generation Mustangs grew in size; the 1973 model had become markedly larger than the original model. The pony car market segment saw decreasing sales in the early-1970s "with many buyers turning to lower-priced, fuel-efficient compacts like Ford's own Maverick - a huge first-year success itself". The Mustang was growing to become an intermediate-sized sedan, "too big and alienated many in its customer base". The allure of the original Mustang was its trim size and concept. The automakers in Detroit had "begun to receive vibrations from the only source it really listens to - new-car buyers... The message: Build smaller cars" as customers stopped buying and the inventory of unsold new cars climbed during the summer of 1973, and there were already positive market expectations for the new downsized Mustang. Automakers were "scrambling" by December 1973 as "the trend toward smaller, less extravagant cars to surge ahead faster than anyone had expected."
Subsequent to becoming president of Ford Motor Company on December 10, 1970, Lee Iacocca ordered the development of a smaller Mustang for 1974 introduction. Initial plans called for a downsized Mustang based on the compact Ford Maverick, similar in size and power to the Falcon, the basis for original Mustang. Those plans were later scrapped in favor of a smaller Mustang based on the subcompact Ford Pinto. The original pony car was based on the compact Falcon and for its second-generation, the Mustang evolved from an even smaller platform, the Pinto that was rolled out in 1971. The final Mustang II production design was set in 1971 by Dick Nesbitt, but the new model was "less of a Pinto than the '64½ had been a Falcon."
Rather than replicating the unchanged designs of the GM pony cars, Chevrolet Camaro and Pontiac Firebird, the Mustang II now competed against sporty subcompact models that included GM's Buick Skyhawk, Oldsmobile Starfire, Pontiac Sunbird, and Chevrolet Monza. The new model would also better compete with 2+2 import coupes such as the Toyota Celica, Datsun 240Z, Mazda RX-3, and the European Ford Capri - which itself was inspired by the original Mustang but built by Ford of Europe, and marketed since April 1970 in the U.S. by Mercury as a captive import. It saw a new competitor from Germany in 1974 with the Volkswagen Scirocco, and the BMW 2002 introduced earlier in the late 1960s. The new design featured rack and pinion steering and a separate engine sub-frame that decreased noise, vibration, and harshness.
According to Ford's Chief Engineer Stuart M. Frey (younger brother of Donald N. Frey) Iacocca expected a high level of fit and finish, wanting the car to be "a little jewel". The Mustang II production was 385,993 units the first year. The big 1973 Mustang total reached 134,867, but the 1974 version was within "10 percent of the original Mustang's 12-month production record of 418,812." Over five years the Mustang II recorded four of the ten top model year Mustang sales. A 2009 report confirmed Iacocca's vision for the 1974-1978 Mustang, saying it "was the right car at the right time, selling more than 1 million units in four years."
The introduction of the Mustang II in September 1973 coincided with the oil embargo. The marketplace was adjusting to the fuel crisis, increasing insurance rates, United States emission standards, safety regulations, and downturns in the economy, as well as the waning consumer demand in the pony car segment. GM had considered discontinuing the Camaro and Firebird after 1972, and in 1974 Chrysler discontinued the Barracuda and Dodge Challenger, American Motors discontinued the Javelin, and lighter, more economical imported cars became increasingly popular - "in effect, filling the segment the Mustang had created, then abandoned."
1974
Designers and engineers worked feverishly on a "reinvented" Mustang, mimicking the first version, by the traditional new model year introduction during the fall of 1973. The new Mustang II returned to a size closer to the 1965 model, ultimately winning the Motor Trend Car of the Year. The economical Mustang II became popular for consumers almost concurrently with their experience with gasoline rationing that was part of the 1973 oil crisis.
"Just as the original Mustang had been based on mundane Falcon components, Iacocca and company decided to use some of the parts from the new-for-1971 subcompact Ford Pinto as the basis for the Mustang." The new Mustang was viewed as a "fun-to-drive economy" car, but "in reality it shared its underpinnings with the ... Pinto." The Mustang II carried handling and engineering improvements, its performance was comparable to contemporary Detroit products.
Competitors also included the Toyota Celica and the Datsun 240Z. Sales of such imports attracted fewer than 100,000 customers in 1965, but by 1972 demand had increased; therefore, the "Mustang II's mission was to capture a big slice of this sizable new pie."
Available as a coupe or three-door hatchback, the new car's base engine was a 140 cu in (2.3 L) SOHC I4, the first fully metric-dimensioned engine built in the U.S. A 171 cu in (2.8 L) V6 was the sole optional engine. Mustang II packages ranged from the base "Hardtop," 2+2 hatchback, a "Ghia" luxury group with vinyl roof, and a top of the line V6-powered Mach 1. A V8 engine option would not be available in a Mustang for the only time for the 1974 model year (except in Mexico).
"The Mustang II's attractive all-new styling was influenced by coachbuilder Ghia of Italy, which had recently been acquired by Ford. It carried through the long-hood, short-deck theme of the original, and as Iacocca requested it came as a notchback and hatch-equipped fastback." Mustangs lost their pillarless body style; all models now had fixed rear windows and a chrome covered "B" pillar that resembled a hardtop, but in fact was a coupe. In Mustang advertisements, however, Ford promoted the notchback coupe as a "Hardtop".
Almost replicating the initial 1965 Mustang's sales rush, "even without any real performance appeal, the '74 Mustang II brought buyers running into Ford dealerships." Sales for the Mustang II increased in 1974, making it the 6th best selling Mustang of all time with 296,041 units produced.
1975
"With oil crisis memories starting to fade" Ford needed a V8 in the Mustang II to return "performance to respectable levels." The engine bay was re-engineered to accept the 302 cu in (4.9 L) V8 option for the 1975 model year, with revised hood and header panel. The engine was limited to a two-barrel carburetor and "net" 140 hp (104 kW; 142 PS). Since Ford's Mexican division never lost the V8, they assisted in the modifications.
Testing by Road & Track "recorded zero to 96 km/h (60 mph) in 10.5 seconds, and a top speed of 171 km/h (106 mph)." The Mustang II's 302 cu in engine became Ford's first officially designated metric V8 Mustang; it was called the "5.0 L" even though its capacity was 4.942 L.
Other than the optional V8 engine, the car underwent minor changes in 1975. The Ghia received opera windows and a padded vinyl half-top. In mid-year, a 2.3 L "MPG" model was added, featuring a catalytic converter and a 3.18:1 rear-axle ratio (standard was 3.40:1) to claim EPA-version economy estimates of 23 mpg-US (10 L/100 km; 28 mpg-imp) in the city and 34 mpg-US (6.9 L/100 km; 41 mpg-imp) on the highway. To underscore fuel efficiency, all base 2.3 L Mustang IIs were called MPG after 1975.
The Mustang II achieved record sales for 1975, making it the 9th best selling Mustang of all time, with 199,199 sold.
1976
In 1976, Ford offered the "Stallion" appearance group including styled wheels, blacked-out grille, bumpers and body moldings as well as the "Cobra II" appearance package with black grille, simulated hood scoop, front and rear spoilers, quarter window louvers, accent stripes and a cobra emblem on the front fenders - available with all engine choices. Automotive historian Gary Witzenburg observed that properly equipped, the thing actually performed pretty well by 1976 standards." Full instrumentation was standard. A manual moon roof was optional.
1977
The 1977 model year introduced a "Sports Appearance Group" for the Ghia model that was color matched to either black or tan paint, as well as several minor styling changes and expanded color options for the Cobra II. Also new was a T-top option for the fastback featuring twin removable tinted glass panels. Midway through the 1977 model year, changes for the 1978 model year were pulled ahead to sell early. It is most notable on the Cobra II models where the hood scoop was turned around to seem more aerodynamic and the graphics were revised. For the decals, the dual stripes running the length of the car were replaced with a single stripe and on the side of the car the snake and "COBRA II" decal were replaced with a large stripe down the center with large "COBRA" lettering in the middle. Louvers were added to the hatch and the side panel louvers only came in black. All the window and glass moldings were painted black as well.
1978
In 1978, the "King Cobra" became available. This was a limited edition version with 4,313 units produced. It featured a deep air-dam, stripes, and a "Pontiac Trans-Am style" cobra snake decal on the hood. The King Cobra was available only with the V8 to help bolster the car's performance image.
On the momentum of the Mustang II's successful sales, a totally new Mustang was introduced for the 1979 model year.
This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia.
The Ford Capri is a fastback coupé built by Ford Motor Company between 1968 and 1986, designed by American Philip T. Clark, who was also involved in...
The all-new Ford Mondeo delivers the global debut of a new pedestrian detection technology that could help reduce the severity of accidents or help drivers...
Ford of Europe is launching the most stylish and technologically advanced Ford Mondeo model ever. With a fresh, restyled exterior, an enhanced interior,...
With its three available body styles - 4-door saloon, 5-door hatchback and wagon - as well as a comprehensive choice of equipment levels, Ford Mondeo is more...
The distinctive, all-new Ford Mondeo introduces new technical features to the Ford range and combines these with further improved driving dynamics and...
There was also a ST TDCi, a sports version of the regular diesel. This, available in all forms, had a 2.2-litre 4-cyl diesel engine, developing 153 bhp (114 kW).
The Ford Mondeo second generation model was launched by Ford in October 2000. This Mondeo was considerably larger than its predecessor, and although Ford...
Launched in October 2000, the Mondeo Mk III was considerably larger than its predecessor, but is still based on the Mk I's floorpan and running gear.
For 2004, the Mondeo was given a very mild upgrade, the new models being identifiable by the larger chrome honeycomb grille, a new central dashboard...
Equipped as standard with an 88 kWh (useable) extended range battery, Ford Mustang Mach-E GT also enables driving enthusiasts to embrace pure-electric...
Ford Mustang Mach-E will be available in both standard-range (75.7 kWh lithium-ion battery) and extended-range (98.8 kWh battery), which has a targeted EPA...
Ford Mustang Mach-E Rally includes a lithium-ion battery with a 91 kWh usable capacity and is targeting an EPA-estimated range of 250 miles.
The Ford Falcon XR8 Sprint will be powered by a bespoke Sprint calibrated version of Ford's 5.0-litre Supercharged V8 that develops 345 kW @ 5,750 rpm...
Ford is drawing on its performance heritage to launch the limited-edition, high-performance Falcon Sprint series, which goes on sale in May 2016. A total...
The G6E builds upon the luxury G Series story even further, adding to the standard G6 specification with a range of features to deliver a highly-specified...
The exciting Boss 290 5.4-litre four-valve V8 engine moves to the XR8 with the introduction of the FG Falcon and is complemented by a new exhaust system...
Ford BF MkII Falcon went on sale 22nd October, 2006. The XT, Futura and Fairmont sport a facelift, while the XR range gets some minor interior updates.
The stunning new Boss 260 V8 engine in the Ford BA Falcon XR8 is the first salvo in a new barrage of high output engines developed by Ford Australia's...
The Ford AU Falcon was a full-size family car, manufactured by the Ford Motor Company of Australia between September 1998 and September 2002. The AU...
Hot on the heels of its return to the V8 Supercar winners circle Ford has given its road-going equivalent - the XR8 Falcon - a performance boost by adding...
The Ford EL Falcon is a full-size car that was manufactured by the Ford Motor Company of Australia between 1996 and 1998. The EL Falcon served as the final...
Visually the 1991 Ford EB Falcon remained nearly identical to its predecessor. The most noticeable change was the transfer of the Ford emblem from the tip...
The end of production of the Falcon in the US paved the way for much greater Australian input in the design of Australian-made Falcons, from 1972 onwards,...
The 1977 model year introduced a "Sports Appearance Group" for the Ghia model that was color matched to either black or tan paint, as well as several minor...
The second-generation Ford Mustang is a pony car that was manufactured by Ford from 1973 until 1978. It was introduced in showrooms during September 1973,...
The fourth-generation 5.0-liter is set to deliver the most naturally aspirated horsepower of any Ford Mustang GT thanks to an innovative dual air intake box and...
Ford Mustang Dark Horse provides unique chassis tuning, larger rear sway bars and heavy-duty front shocks. Stopping is courtesy of 19-inch Brembo front 6 piston...
Ford Mustang GTD design is pure purpose. Every line drives aerodynamic performance at track speed, from the front splitter, vented hood and fenders to the available C-pillar...
Ford's legendary 5.0-liter V8 engine has been thoroughly reworked. It is more powerful and revs higher than any Ford Mustang GT before. This power increase...
A new two-piece upper grille, lower grille and valance, and new side grilles, all contribute to Ford Mustang Mach 1's signature look and more demanding aero...
Ford Mustang Shelby GT500 starts with a supercharged 5.2-liter aluminum alloy engine built by hand. To keep the intake air cooler and deliver a lower...
Upgrades to Ford Mustang Shelby GT350's standard MagneRide active suspension complement the aero and tire enhancements with recalibrated springs and...
Ford Mustang GT continues with the latest edition of the throaty 5.0-liter V8, now featuring an upgraded valvetrain and cylinder heads that yield more than...
One of the most iconic performance Mustang nameplates of all time is returning with the reveal of the all-new Shelby® GT350 Mustang. The original...
The Ford Mustang EcoBoost engine uses direct injection, variable cam timing and turbocharging to deliver plenty of usable performance and projected...
The 2013 Mustang GT with 5.0-liter engine will now deliver 420 horsepower. Based on learnings from developing the high-output 444-horsepower Ford Mustang...
The 2013 Ford Mustang Shelby GT500 is about to go where no Mustang has gone before, with a complete package for everyday drivers and track-day...
The Ford Mustang Boss 302 is all about performance, and a nod to heritage comes standard with new paint options and design details for 2013. A new hockey...
Ford Mustang - the icon of American performance and style - gets even more street swagger with a new design and a list of smart features that signal even...
The 5.0 is back! The 2011 Ford Mustang GT arrives with an all-new advanced 5.0-liter V-8 engine, developed by a passionate cadre of enthusiastic engineers...
The Ford Mustang Shelby GT500 continues a legacy of all-around performance that made the original a world-class racer on tracks and road courses around the world.
How do you amp up a performance car package as complete as the new 2012 Ford Mustang Boss 302 - already a street-legal race car in its own right? Pull...
Ford gave the green light only once before: In 1968, management approved a special Mustang - a car that sacrificed nothing in its quest to be the best...
Muscle goes modern for 2010 as the Ford Mustang - America's favorite muscle car for 45 years straight - hits the streets with a new exterior design; new...
The 4.6-liter all-aluminum V8 that powers the 2005 Ford Mustang GT has three-valve heads and cranks out 300 horsepower. Because it has an aluminum...
Just like its 1968 namesake, the 2008 Ford Mustang Shelby GT500KR builds on the strong foundation of the Shelby GT500. Packing 40 more horses under its...
Performance Inspiration: Carroll Shelby and Ford Special Vehicle Team join forces to create a modern successor to the famous Shelby GT500 of the late 1960s...
Since its dramatic 1964 introduction, Ford Mustang has been the icon of American performance with its bold style, brawny engine and rear-wheel-drive...
The Mach 1 used a non-supercharged version of the Cobra's 4.6 DOHC V8 which utilized cams from the Lincoln Navigator motor, and it was conservatively rated at 305 hp.
In 2001, Ford offered a special version of its GT with the "Bullitt" nameplate. It was reminiscent of the 1968 390 fastback model driven by Steve McQueen in...
The 2000 Cobra R utilized a modular iron block and the best cylinder head/intake system yet for the modular motors, flowing staggering numbers even in stock form.
A refreshed model with Ford's "New Edge" styling themes came in 1999. Gone were many of the soft lines of the early SN-95s. Moreover, bite was added to the...
To compensate for the relative lack of low end response associated with these kind of cylinder heads, SVT also put an intake manifold with dual runners...
In 1996, Mustang fans were expecting the 5.8 L (351 in3) V8 to make its return to the regular production. However, this is not what they got.
In 1987, the Mustang got cylinder heads almost identical to the ones on the 85' GT, and a higher horsepower intake manifold, and ratings jumped to 225...
For 1979 an all new Mustang hit the dealerships. Larger and based on the "Fox" platform the new mustang deviated from the smaller compact...
The "Cobra II" appearance package with black grille, simulated hood scoop, front and rear spoilers, quarter window louvers, accent stripes and a cobra emblem...
The second-generation Ford Mustang is a pony car that was manufactured by Ford from 1973 until 1978. It was introduced in showrooms during September 1973,...
The 1977 model year introduced a "Sports Appearance Group" for the Ghia model that was color matched to either black or tan paint, as well as several minor...
Boss 351 examples were similar in appearance to the Mach 1, and included a larger black-out hood than Mach 1's, front and rear spoilers, dual exhaust...
Due to tightening emissions regulations, the Boss 351 edition and optional 429 big block were dropped after 1971, leaving the 351 cu in (5.8 L) variants as...
Very much a different car than in 1964, Ford was deluged with mail from fans of the original car who demanded that the Mustang be returned to the way it had been.
This new performance engine incorporated elements learned from the Ford 385 series engine and the Boss 302, particularly the poly-angle combustion...
It's worth noting though that 1969 model year sales exceeded those of 1970. The rear fender air scoops were removed and the taillight panel was now flat...
The 1970 model year Mustangs were restyled to be less aggressive and therefore returned to single headlamps which were moved to the inside of the grille...
The Boss 302 was created to meet Trans Am rules and featured distinctive hockey-stick stripes. 1628 Boss 302's and 859 Boss 429's were sold through 1969...
The understated Boss 429 was created to homologate the Boss 429 engine (based on the new Ford 385 series engine) for NASCAR use. The two Boss models...
The GTs lost their Cobra tag for 1969 and once again were marketed simply as Shelby GT 350 and Shelby GT 500. The GT 350 and GT 500 for the 1969 model year...
The 1969 model year restyle "added more heft to the body" with body length extended by 3.8 inches (97 mm) (the wheelbase remaining at 108...
Two identical 1968 Mustang GT fastbacks were used in the filming of the classic Warner Bros. movie "Bullitt" that debuted in theaters on Oct. 17, 1968.
For 1967, the GT 350 carried over the K-Code high performance 289 with a 'COBRA' aluminum hi-rise. The GT 500 was added to the lineup, equipped with a...
The 1967 model year Mustang was the first redesign of the original model. Ford's designers began drawing up a larger version even as the original was...
The 1965-1966 cars were the smallest and lightest of the GT 350 models. These cars are often called "Cobras", which was the Ford-powered AC-based...
The Mustang GT version was introduced as the "GT Equipment Package" and included a V8 engine (most often the 225 hp (168 kW; 228 PS) 289), grille-mounted...
The 2019 Challenger SRT Hellcat lineup delivers improved performance numbers, including a new top speed of 203 miles per hours (mph), making the...
Dodge Challenger SRT Super Stock gives the driver the ability to set up maximum drag strip performance and precision to cover the quarter mile as quickly as possible.
New for 2019, all Challenger RT Scat Pack models get a new look, courtesy of the 2018 Challenger SRT Hellcat. The power-bulge aluminum hood features...
The newly consolidated Dodge and SRT brands are launching out of the gate at full throttle - introducing the new 600-plus horsepower 2015 Dodge Challenger...
The new Challenger TA 392 ups-the-ante with its best-in-class 485 horsepower and 475 lb.-ft. of torque, delivering up to 113 more horsepower and a 65-lb.-ft...
The all-new 2015 Dodge Challenger SRT, with its supercharged 6.2-liter HEMI. Hellcat engine, produces an unprecedented 707 horsepower and 650 lb.-ft. of...
While the 2018 Dodge Challenger SRT Demon remains a potent street car, every component was scrutinized and optimized for weight, capability and durability...
2018 Dodge Challenger SRT Hellcat Widebody is powered by the 6.2-liter supercharged HEMI V-8 with 707 horsepower and 650 lb.-ft. torque...
Inside the 2015 Dodge Challenger is an all-new enthusiast designed cockpit featuring world-class materials, execution and technology, also inspired by...
At the 2008 New York International Auto Show, Chrysler LLC unveiled its full 2009 Dodge Challenger model lineup. Pricing will start in the low $20's. The...
The return of the iconic Dodge Challenger brings what pony car fanatics crave: ground shaking performance, unmistakable design cues reminiscent of the...
For 2012, the Dodge Challenger SRT8® 392 adds even more high-tech performance features to solidify its place as the brand's ultimate modern American...
Evolving into the largest homecoming of modern Dodge rear-wheel-drive performance cars, the seventh annual Spring Festival of LXs marked the perfect...
The first Challenger was the division's late entrant to the pony car market segment in the United States, launched for the 1970 model year. It was strongly...
The all-new 2013 SRT Viper was unveiled at the 2012 New York International Auto Show, marking its highly anticipated return to the high-performance sports...
The SRT engineering team that developed the 2016 Dodge Viper ACR is well-stocked with members who race their own cars, as well as learning from the...
The new 2008 Dodge Viper SRT10 boasts more of what performance aficionados crave: kick-in-the-pants, throw-back-in-the-seat power, combined with benchmark...
Dodge pulled the cover off the newest special-edition model of the 2010 Dodge Viper SRT10 lineup. The Dodge Viper SRT10 ACR-X is a turn-key, non-street...
Dodge announced that the all-new 2008 Dodge Viper SRT10® ACR - short for American Club Racer - will make its public debut at the 2007 Los Angeles Auto...
The engine is SAE-certified to produce 510 bhp (380 kW) and 535 lb-ft (725 Nm). Unlike the original coupe, the chassis was not modified. This makes the...
The roadster relocated the exposed side exhaust pipes to a single muffler at the rear exiting via two large central tail pipes during the middle of the...
In addition to the race cars, 100 street versions of the Viper GTS-R were made, which were rated at 460 hp (343 kW) and 500 ft-lbf (67 Nm) of torque.
The 2019 Chevrolet Camaro's updated designs are not only striking but also help to improve performance. For instance, the grille details and hood and...
Functionality defines the Chevrolet Camaro ZL1's form, with the exterior shaped during more than 100 hours of wind-tunnel testing and on-track validation...
In preliminary testing, the new Chevrolet Camaro ZL1 1LE was 3 seconds faster than the standard ZL1 Coupe around General Motors' 2.9-mile, 18-turn Milford Road...
The sixth-generation Chevrolet Camaro offers higher levels of performance, technology and refinement and is designed to maintain the sporty car segment...
The functional hood vent on the Chevrolet Camaro SS helps reduce heat and aerodynamic lift. Moving to the rear, the sculptural decklid, horizontal lamps...
The heart of the 2014 Camaro Z/28 is the lighter, naturally aspirated 7.0L LS7 first introduced in the Corvette Z06. It is exclusively offered with a Tremec TR6060...
Chevrolet introduced the restyled 2014 Camaro line at the 2013 New York Auto Show, including the return of the Z/28, the most iconic model in Camaro...
Two 6.2L V-8 engines are offered in the Chevrolet Camaro SS, including the new L99 on automatic-equipped vehicles and the LS3 on manual-equipped models.
The 2012 Chevrolet Camaro ZL1 debuted at the 2011 Chicago Auto Show. It is the highest-performing Camaro and the most technically advanced car ever...
The wait is over. After a seven-year hiatus, the new Chevrolet Camaro is now back in dealer showrooms. Combining great looks, performance and advanced...
2001 was the lowest production year for the Camaro with 29,009 units. This was partially due to production ending earlier than usual to begin work on the...
The third-generation Chevrolet Camaro was introduced for the 1982 model year by Chevrolet. It continued to use General Motors's F-body platform and...
For 1975, a catalytic converter was added to the exhaust system of all US-market GM passenger cars, including the Camaro. The "Air Injection Reactor"...
The Z/28 option code was introduced to the Camaro in December 1966 for the 1967 model year. It was the brainchild of Vince Piggins, who conceived offering...